Product | Supermicro Storage SuperServer 520P-ACTR12L - 12x 3.5" SATA/SAS - Broadcom 3816 12G SAS - Dual 10-GbE - 800W 1+1 Redundant |
Action | Select |
Main Specifications | |
Series | Storage SuperServer |
Supported Processor | 3rd Gen Intel Xeon Scalable Processors |
System Bus | 3 UPI up to 11.2GT/s |
Memory Technology | DDR4 ECC Registered |
Chipset | Intel C621A |
Form Factor | 2U |
Color | Black |
Detailed Specifications | |
Memory Slots | 8x 288-pin DIMM sockets |
Max Memory Support | UP to 2TB: 8x 256 GB DRAM UP to 3TB: 4x 256 GB DRAM and 4x 512 GB PMem Intel® Optane™ persistent memory 200 series |
Graphics | ASPEED AST2600 BMC |
Ethernet | 2x 10GbE BaseT with Intel® X550 |
Serial ATA | Intel® C621A controller for 10 SATA3 (6 Gbps) ports; RAID 0,1,5,10 |
SAS | SAS3 (12Gbps) via Broadcom 3816 (IT mode) |
Power | 800W (1+1) Redundant High efficiency Power Supplies |
External Bays | 12x 3.5" hot-swap SATA/SAS drive bays 2x 2.5" SATA or NVMe rear drive bays (optional) |
M.2 | M.2 Interface: 1 SATA/PCI-E 3.0 x4 Form Factor: 2280/22110 Key: M-Key |
Expansion Slots | Slot 1: PCI-E 4.0 x8 LP (occupied by AOC S3816L) Slot 2: PCI-E 4.0 x8 LP Slot 4: PCI-E 4.0 x16 LP Slot 6: PCI-E 4.0 x16 LP Slot 7: PCI-E 4.0 x8 LP |
Management | Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support |
Front Panel | Power On/Off System Reset Device Activity LAN 1 Activity LAN 2 Activity Power Failure LED Power status System information |
BIOS | AMI 32MB SPI Flash EEPROM |
Cooling | 3x (8cm x8cm x3.8cm) heavy duty fans with optimal fan speed control 1 Air Shroud |
Dimensions (WxHxD) | 17.2" (437mm) x 3.5" (89mm) x 25.6" (650mm) |
Gross Weight | 58 lbs (26.3 kg) |
USB Ports | 4 USB 2.0 port(s) (2 headers; 2 rear) 5 USB 3.2 Gen 1 port(s) (2 headers; 2 rear; 1 Type A) |
Serial Ports | 1 COM Port(s) (1 header) |
LAN Ports | 1 RJ45 Dedicated IPMI LAN port 2 RJ45 10GBase-T LAN ports |
SATA DOM | 2 SuperDOM (Disk on Module) port |
VGA Ports | 1x VGA port |
Trusted Platform Module | TPM Header |
Action | Select |